Sources and processing
Wave and wind forecasts use the location forecast time series and model map layers available to RippleForecast. Weather displays use the available wind, precipitation, temperature, cloud and visibility forecast layers. Tide curves and high/low tide times come from precomputed tide prediction series and extrema for catalogued locations. These are forecasts, not live measurements or observations at the beach.
Public place pages reuse these forecast sources; they do not run a separate prediction model. Sampling or interpolation can turn a model grid into a value at a place, but does not create a new observation or make the underlying grid more detailed. The publisher is not necessarily the upstream model producer.
Use the source information shown with each forecast. A model name, run identifier, spatial resolution or forecast step is shown only when the source provides it. When this information is unavailable, the model or resolution is unknown: map zoom, a place name and the number of decimal places are not evidence of model resolution. Different variables may come from different source runs.
Our existing articles provide further product context: coastal wave modelling and the surf quality indicator. They are explanatory articles, not a specification of the model or resolution behind every current forecast, or a published validation study.
Issue time, valid time and collection time
- Model run or issue time
- Identifies the source model run or issuance, when supplied. It is not the time the predicted conditions occur. The interactive maps label their issue time in UTC.
- Forecast valid time
- The instant for which the conditions are predicted. Compare this with your intended activity time, not just the issue time. Public place tables identify their IANA time zone and include UTC times; use the stated zone and UTC offset when daylight saving changes. Interactive views may offer a different display time zone.
- Collection or page generation time
- The time the website collected or assembled a snapshot. Reloading a page can change this time without a new model run. It is not proof that the forecast was issued or updated then.
Forecast spacing is not the same as a rainfall accumulation interval or the averaging period of wind. An unavailable issue time stays unknown. Retained or stale data can remain visible while a newer run is unavailable; read the accompanying status and valid times rather than assuming that a visible value is current.
Variables and units
- Breaking wave height (hbreak)
- The forecast breaking-wave height, expressed in metres in the source time series. Surf forecasts use this field. It is not interchangeable with significant wave height, an observed wave face, or a guarantee of the largest wave in a set.
- Significant wave height (Hs or hsig)
- The significant wave-height measure used in the wave forecast, in metres. It describes the sea state, commonly interpreted as the average height of the highest third of waves, not the maximum individual wave. Boat forecasts use this field; individual waves can be larger.
- Wave period and direction
- Peak wave period is in seconds and is distinct from wave height. Direction is expressed in degrees or compass points. Do not interpret a direction arrow as a current measurement, or assume that wind and wave arrows describe the same process.
- Wind
- Wind direction uses the meteorological direction the wind comes from: north is 0°/360°, east 90°, south 180° and west 270°. Wind speed units are shown with the forecast; interactive settings can use km/h, knots or mph. Wind map vectors are converted from m/s for display. One m/s is 3.6 km/h. Wind averaging periods and gust definitions are unknown unless the source states them; do not read a wind-speed value as a guaranteed peak gust.
- Rain, temperature, cloud and visibility
- Rainfall is displayed in millimetres where available. The rainfall accumulation interval is unknown unless explicitly supplied: do not assume a value means mm per hour or a daily total, and do not sum overlapping or undefined intervals. Temperature is displayed in degrees Celsius, cloud cover as a percentage, and visibility with its distance unit. Missing values are not zero rain, clear skies or unlimited visibility.
- Quality indicators
- Surf and boat quality indicators summarise selected forecast conditions. They are category-specific guidance, not measured safety ratings or assurances that conditions suit a particular person, vessel or beach.
Tide heights and the display reference
Tide heights are shown in metres. For the tide curve and high/low predictions, the application subtracts the location’s stored hl offset from each raw predicted height. The offset is the catalogue’s lowest-low reference; if it is absent, the code uses zero. This is a display normalisation, not independent verification of a surveyed vertical datum.
Do not assume that this zero is the official chart datum, Lowest Astronomical Tide (LAT), or an equivalent reference at another port. A displayed tide height is not water depth or under-keel clearance. Tide predictions alone do not account for every effect of storm surge, atmospheric pressure, wind, waves, rivers or local harbour conditions. Use official local tide and navigation information for navigation decisions.
Uncertainty, coverage and safe use
Forecasts are estimates. Uncertainty generally increases with lead time, and local bathymetry, shelter, shoreline geometry and rapidly changing weather can produce conditions different from a model value. Coverage and available variables depend on the current source data. An unavailable forecast is not a forecast of calm conditions.
This page does not provide quantified accuracy percentages, confidence intervals, expert-review certification or validation statistics. No forecast or quality indicator should be your only basis for entering the water, navigation or an emergency decision. Check conditions at the location, your abilities and equipment, and current official warnings.
In New Zealand, check MetService marine forecasts and MetService warnings. These links are regional New Zealand resources, not a global warning service or a statement that MetService supplies every RippleForecast variable. Elsewhere, consult the relevant national weather service, maritime authority and local harbour notices.
Read our Terms of Service for the service limitations.
Report a correction or ask about a source
Contact [email protected], the address on our About page. Include the public place URL, variable, valid time and time zone, and what appears incorrect. A screenshot or the relevant source/run label can help distinguish a display problem from a forecast difference. Do not send passwords or other sensitive account information. This contact is not an emergency service.
